Student	Faculty	Deluxe	Custom

Deluxe Master's Graduation Gown, Mortarboard and Academic Hood

The look, feel and quality you would expect from a fully custom made master's academic gown, but for hundreds of dollars less!

• Top of the line, custom quality Master's regalia
• Finest quality fabric and workmanship
• Each gown is individually inspected before shipment to customer
• Very full cut, it falls in graceful folds and is most becoming to all types of figures, both male and female
• Features 7" Extra fabric (approximately 60 inches wide in the girth) for a much fuller cut.
• For Full figured (plus size) gowns + 10 inches to 70 inches.
• Made of Pilgrim Cloth — light weight and practically wrinkle free
• 2-1/4" hem on bottom and 1" hem at sleeve.
• Comes pressed on hanger and ready to wear

Please note: These gowns are made to order. Please allow approximately 8 weeks for delivery. If you would like to order one of these gowns, but cannot wait, we may be able to send you a loaner gown which you could return upon receipt of your custom gown.

Prices shown above are for standard sized gowns. For full figured gowns (Plus sizes), please add $25.00 per plus sized gown. Plus sizing adds an additional 10 inches of material in the girth.

Order hoods for your gown here.

Student	Faculty	Deluxe	Custom

The Faculty Master's Gown

Faculty Quality Master's Gown with Deluxe Master's Academic Hood (MBA), Mortarboard and Tassel

A superior quality, fully tailored gown, priced to own!

• Two wide front pleats, two smaller side pleats, and fluted across the back and shoulders.
• Classic Styling, similar to rental gowns, of superior quality
• Fluting provides fullness to the body of the robe and the sleeves
• Made of Pilgrim Cloth (same fabric as our Deluxe Gown) — light weight and practically wrinkle free
• Comes with traditional mortarboard and tassel
• Matching hood also available
• Serged hems
• Gown is approximately 53" wide in the girth. Full figured (plus size) gowns + 10 inches
• In stock. Approx. 2 - 3 week delivery.

Prices shown above are for standard sized gowns. For full figured gowns (plus sizes), please add $15.00 per plus sized gown. Plus sizing adds an additional 10 inches of material in the girth, and is custom made (+/- 6 week delivery)

Order hoods for your gown here.

The Master's Tam

Six sided master's tam with black tassel (@ $64.50) shown above

Master's Velvet Tams are available in your choice of four, six, or eight corners.

Although historically, most Master's degree graduates wore a standard mortarboard with their gown, many Master's degree holders who are also faculty members are now opting to wear a velvet tam rather than a mortarboard to better differentiate themselves from their students.

As such, we now offer a Master's level faculty tam, similar to the doctoral tam, but with a plain black tassel in place of the gold doctoral tassel.

Like the doctor's tam, the Master's faculty tam is available in four - six - or eight sides. However if you do not wish to purchase the Master's tam, we would be happy to send you a mortarboard & tassel, at no charge, with your gown.
Whether you pick a 4, 6, or 8 corner tam has less to do with regulation and more to do with looking your best! Generally, most people seem to prefer the six sided tam, however extremely tall and skinny people may do better with the 8 corner tam since it tends to look more round, and help "fill a person out", while short stocky people may do better with a 4 corner model, since it is sharper and thus makes the person look "less round".

Tams are normally sold adjustable, available in size ranges small-medium; medium-large; and extra large. Therefore we will need your hat size or head size to determine the correct size. Upon request we can also special make an exact fit tam, though may people prefer the adjustable models since hat size can vary depending on haircut, etc.

Because these tams are made of velvet, it would not matter which fabric your gown is made from; you could still purchase the tams without fear of mismatching. This differs from hoods which should preferably be made from the same fabric quality as the gown. Also for this reason, many people purchasing Souvenir Quality gowns also purchase these tams as a way of upgrading their look without actually purchasing a more expensive gown. Even if you should upgrade to a more expensive gown later on, you would still use the same tam.

Master's Tam and black tassel (no year date)
shown with Deluxe hood

Pricing for Master's tams:

4 corner tam $ 64.50 (with or without gown purchase); 6 corner tam $ 64.50 (with or without gown purchase)
8 corner tam (w/o gown purchase) $ 84.50; 8 corner tam (discount with gown purchase) $ 64.50

Ordering info for academic tams:

Be sure to indicate your hat size or your head size. Using a tape, measure the circumference of your head about an inch over your eyebrow. the size should be in the neighborhood of 22 to 23 1/2 inches. It should be snug but not too tight. Round size to nearest quarter inch. If you are between sizes, err to the larger quarter inch. A cap size would be something like 6 7/8, 7 1/4, 7 3/8, etc.

Student	Faculty	Deluxe	Custom

Our most economical robe!

Our Student - Souvenir Master's Gowns are shirred at the yoke. The yoke is traditionally styled with two wide front pleats, two smaller side pleats and gathers across the back and shoulders. It is unlined, made from a woven polyester and sewn with polyester thread for additional strength and durability. It features the traditional master's sleeve.

Additionally, we offer quantity discounts on these gowns.
The price will depend upon the quantity of caps and gowns (sets) being purchased.

Each set comes individually wrapped with a cap, gown, and tassel. Hoods are not included with the set. Order hoods here.

Pricing for Souvenir  Master's Cap and Gown
1 - 3 sets	$	58.50
4 - 12 sets	$	54.00
13 - 24 sets	$	48.50
25 - 49 sets	$	39.75
50 - 99 sets	$	34.50
100 or more sets Ordering info	$	29.75

Student	Faculty	Deluxe	Custom

Custom-Made Master's Gown

The Ultimate! 
A fully custom made to measure gown, in your choice of fabrication and styling.

Your choice of fabrics especially chosen for their beauty, durability and wrinkle resistance.
Choices include poplin, crepe, polyester blend, and tropical wool blends.

When combined with our detailed tailoring and workmanship, the result is superior regalia as personal to you as the honor it represents.

Includes personal initials sewn onto garment, and sent with a convenient vinyl garment bag

Mortarboard and hood are made from same material as gown

Your exact sizing, including height, weight, chest, waist, neck size, shirt sleeve length, and floor clearance desired.

Three generations of experience and an absolute confidence in our product allows us to make an offer which is completely worry free for you. Any custom made to measure gown that does not confirm exactly to your order with regard to style, fabric, color or measurements, may upon receipt of proper authorization be returned and an appropriate adjustment will be made immediately.

Please note: As these gowns are individually made to order, please allow approximately 6 - 8 weeks for delivery. If you would like to order one of these gowns, but cannot wait, we may be able to send you a loaner gown which you could then return, upon receipt of your custom gown.

To order Completely Custom Made Regalia, please contact our office directly either by phone (1-800-788-9336), fax (1-888-315-8760), or e-mail with the specifics of what you are looking for.  

Student	Faculty	Deluxe	Custom

We recommend Full Figured (Plus sized) gowns for

• individuals up to 5 ft  2" who are over 180 pounds;
• individuals up to 5' 5" who are over 220 lbs;
• individuals up to 5' 8" who are over 240 lbs;
• individuals up to 5' 11" who are over 270 lbs;
• or any one over 320 lbs.
• Additionally, heights 6' 9" or taller are considered Full Figured.

If you fit in any of these categories, please be sure to indicate your weight together with your height, and to mention in your order that you require a plus (full figure) gown.